BLAST CHILLER CONTROLLERS
XB8870D is the innovative controller for the optimized management of blast chillers. Designed to better manage blast chilling, freezing and food storing, it is characterized by its configurability and easiness of use of the chilling cycles. The highly customizable user interface and the high performances are just some of the features that allow the controller to fully satisfy even the most demanding customers. The strong points of this device are the relays with higher capacity suited to directly drive the loads and the connections with screw disconnectable connectors.
The controller is available in 10 DIN Rail size, and, thanks to Visotouch graphic display, it allows the user to instantly obtain complete information on the status of the machine (room temperature, product temperature, remaining cycle time, etc.).
Chill and Freeze cycles
• Chill : when it is necessary to reduce the temperature with immediate impact, below 10°C (from 35°C to 65°C is the critical temperature zone for the higher bacterial proliferation).
• Freeze : normally preceded by a CHILL cycle, it is used to freeze food in a faster way in order to preserve its organoleptic properties and to avoid icing inside of it.
FUNCTIONING
The cycles can be set according to TIME or TEMPERATURE. If the cycle is set by time, its duration will be the selected time (the food temperature is not considered); if the cycle is set by temperature, it will finish once the product (through the needle probe) will reach the selected temperature. In both cases the temperature of the room is controlled by the room probe, which is also used for the compressor control. Cycles can be SOFT or HARD.
SOFT CHILL cycles : the blast chiller works with a room temperature that usually is positive.
HARD CHILL cycles : the blast chiller works with different room temperatures; usually the first one is negative while the second one is positive.
SOFT FREEZE cycle : the blast chiller works at different room temperatures. Usually the first is positive (around 0° C), while the second is negative (usually around -35°C)
HARD FREEZE cycle : the chiller works at a room temperature that is usually around -35 °C.
The controller is available in 10 DIN Rail size, and, thanks to Visotouch graphic display, it allows the user to instantly obtain complete information on the status of the machine (room temperature, product temperature, remaining cycle time, etc.).
Chill and Freeze cycles
• Chill : when it is necessary to reduce the temperature with immediate impact, below 10°C (from 35°C to 65°C is the critical temperature zone for the higher bacterial proliferation).
• Freeze : normally preceded by a CHILL cycle, it is used to freeze food in a faster way in order to preserve its organoleptic properties and to avoid icing inside of it.
FUNCTIONING
The cycles can be set according to TIME or TEMPERATURE. If the cycle is set by time, its duration will be the selected time (the food temperature is not considered); if the cycle is set by temperature, it will finish once the product (through the needle probe) will reach the selected temperature. In both cases the temperature of the room is controlled by the room probe, which is also used for the compressor control. Cycles can be SOFT or HARD.
SOFT CHILL cycles : the blast chiller works with a room temperature that usually is positive.
HARD CHILL cycles : the blast chiller works with different room temperatures; usually the first one is negative while the second one is positive.
SOFT FREEZE cycle : the blast chiller works at different room temperatures. Usually the first is positive (around 0° C), while the second is negative (usually around -35°C)
HARD FREEZE cycle : the chiller works at a room temperature that is usually around -35 °C.
| FEATURES | XB885D |
| Housing | Self extinguishing ABS, white, 10DIN, 175x110x59.5mm (WxHxD) |
| Format | DIN Rail |
| Mounting | Screw disconnectable connectors |
| Power supply | 24Vac |
| Power absorption | 20VA (for applications with unipolar electronic valve: 40VA) |
| Analog Inputs | 5 x NTC, PTC, PT1000 2 x NTC, PTC, PT1000, 4-20mA, 0-10V |
| Digital Inputs | 6 x free contact |
| Digital Outputs | 4x 16(8)A, 1x 16A In-Rush (for led lights), 3x 8(5)A |
| Analog Outputs | 1x 0-10V, 4-20mA or PWM 2x 0-10V or 4-20mA |
| Other | RS485 Slave USB ETHERNET (by converter USB-ETH-CONV) Connection for remote Touch keyboard Internal Clock |
VISOTOUCH: For Blast Chiller Application
Dixell expands its range of products dedicated to blast chillers by introducing a new application designed to manage blast chilling, freezing and food preservation.
FEATURES & BENEFITS
• Touch user interface
• 6 languages
• High level of customization
• 8 standard cycles (chill-freeze,soft/hard by temperature or time)
• 12 customizable cycles
• Fish sanitization cycle
• Needle probe heating management
• UV lamp management
• HACCP and ALARM datalogger
Dixell expands its range of products dedicated to blast chillers by introducing a new application designed to manage blast chilling, freezing and food preservation.
FEATURES & BENEFITS
• Touch user interface
• 6 languages
• High level of customization
• 8 standard cycles (chill-freeze,soft/hard by temperature or time)
• 12 customizable cycles
• Fish sanitization cycle
• Needle probe heating management
• UV lamp management
• HACCP and ALARM datalogger
Datasheet Download
Manual Download
Dimension & Cut out Download
| XB885D |  |
| VISOTOUCH Datasheet | |
Manual Download
| XB885D |  |
Dimension & Cut out Download
| 10 Din Rail | |
Dixell Asia Service Center
โทร. 02 017 6900 (24 ชั่วโมง)
มือถือ. 09 5885 4647 (24 ชั่วโมง)
QUICK LINKS
งานประกอบตู้ไฟ
รับเขียนโปรแกรม PLC, SCADA, HMI
รับเขียนระบบ Building Automation
งานด้านประหยัดพลังงาน
งานติดตั้งอื่นๆ
ชุดเครื่องทำความเย็น
CONTACT US
สำนักงานใหญ่ (พัฒนาการ)
โทร. 02 017 6999 (30 คู่สาย), 02 722 0245
สาขาเขียงใหม่
โทร. 053 802 997-8
สาขาภูเก็ต
โทร. 076 521 067-8
สาขาขอนแก่น
โทร. 043 001 417
line ID :